Gas Cans And Safety Cans From Eagle® and Justrite®

• Gas Cans safely contain hazardous liquids and control vapors to reduce the risk of fire, protecting both personnel and facilities.
  
• Gas Cans offer compliance with federal OSHA regulations and state and local fire codes for Can Dispensing Safety.
  
• Eagle® Gas Cans and Justrite® Safety Cans Improve efficiency with ease-of-use features which enhance pouring and filling operations for Can Dispensing Safety
  
• Gas Cans and Safety Cans are available in Plastic Gas Cans, Metal Gas Cans, Portable Gas Cans, DOT Gas Cans and Spill Proof Safety Cans from two leaders Eagle® and Justrite® Manufacturing.

Justrite® And Eagle® Gas Cans And Safety Cans:
Where Are Gas Cans Used?

Gas Cans and Gasoline Safety Cans are virtually every place of business, and even homeowners have occasion to use flammable or combustible liquids that require Can Dispensing Safety Procedures. Gasoline, chemicals, solvents, and a variety of other hazardous liquids are found in varying amounts and locations. Whereas these
liquids are relatively commonplace, it is important to understand the dangers without Proper Gas Cans are present and the special storage and handling procedures required to ensure safe usage. Reviewing the Material Safety Data Sheet (MSDS) helps determine liquid characteristics and recommended safety practices for the proper selection of Gas Cans and Safety Cans for Dispensing Safety procedures.

Accidents and fire risks can be minimized by using proper Safety Gas Can equipment. NFPA is specific on what is required of a Safety Can in order for it to perform as expected under fire conditions For Can Gasoline Storage. The basic purpose of a Gas Can is the control of flammable vapors, while providing a convenient means of carrying, Can Dispensing Safety and storing up to a Five Gallon Gas Can of flammable liquid.

NFPA Code 30 1.6.40 and OSHA 1910.106(a)(29) define a Safety Can as: “A listed (approved) container, of not more than 5-gal (18.9-L) capacity, having a spring-closing lid and spout cover and so designed that it will safely relieve internal pressure when subjected to fire exposure.”

A Safety Can and Gas Can is designed to specifically eliminate one or more of the elements needed for a fire to start: heat, oxygen and fuel. These elements are the “legs” of a fire triangle. The fire triangle demonstrates the three basic elements that must be present simultaneously to support a fire.

Justrite® Safety Cans And Eagle® Gas Cans protect people and property where the potential for disaster when handling flammable liquids demands serious solutions for protection. Just one gallon of vaporized Gasoline Can explode with the same force as twenty sticks of dynamite. Justrite® in particular set the standards for safety and backs them with the toughest approvals out there … including Factory Mutual Research and/or Underwriters Laboratories. An exclusive Ten-Year Warranty on Gas Cans and Safety Cans is your assurance of getting the best when you buy a Justrite® brand Safety Can.

Justrite® Safety Cans Offered in Type I Safety Can

1-gallon Justrite® Safety Can
2-gallon Justrite® Safety Can
2-gallon Gas Can With Funnel – Spill Proof Gas Can
3-gallon Justrite® Safety Can
3-gallon Justrite® Safety Can With Funnel – Spill Proof Gas Can
5-gallon Justrite® Gas Can
5-gallon Justrite® Safety Gas Can With Funnel – Spill Proof Gas Can

Choose Justrite® Type I NonMetallic Plastic Safety Gas Cans when dent and chemical resistance are most important.

Type I Nonmetallic Plastic Gas Safety Cans are constructed of high density polyethylene which offers distinct advantages over Metal Gas Can models. Plastic Gas Cans and Plastic Safety Cans are inert so they stand up to tough acids and corrosives, as well as heat. Plastic Gas Cans are dent, puncture and chip resistant – and their color is integral to the Safety Can. Available options allow you to make the most of storage space and accommodate highly corrosive or high purity liquids.

All Justrite nonmetallic Plastic Safety Gas Cans are designed and manufactured with a unique conductive, current-carrying carbon insert imbedded into rib of the container, completing a ground path between the cover assembly and the flame arrester in the spout. When used with a grounding strip, this provides proper grounding and prevents the creation of an arc during filling or pouring.

All Justrite nonmetallic Type I Plastic Gas Cans are FM approved. The self-close cap, pressure relief mechanism and dual-density flame arrester work together to prevent ignition sources from entering without restricting liquid flow in or out of the Plastic Gas Can. Choose economical plated steel hardware or stainless steel for greater chemical resistance with your Plastic Gas Can.

Justrite® Type I Plastic Gas Cans Product Selection are as follows:

1/2-gallon Justrite® Oval Plastic Gas Can With Plated Steel
1/2-gallon Justrite® Oval Plastic Gas Can With Stainless Steel
1-gallon Justrite® Oval Plastic Gas Can With Plated Steel
1-gallon Justrite® Oval Plastic Gas Can With Stainless Steel
2.5-gallon Justrite® Round Plastic Gas Can With Plated Steel
2.5-gallon Justrite® Round Plastic Gas Can With Stainless Steel
5-gallon Justrite® Round Plastic Gas Can With Plated Steel
5-gallon Justrite® Round Plastic Gas Can With Stainless Steel

Eagle® Gas Cans Offered in Type I Safety Can

These Eagle Gasoline Storage Cans and Safety Cans have a spring-closing lid with a neoprene gasket that safely relieves internal pressure at 5 psi. These Metal Gas Cans are brought through a deep drawn manufacturing process which results in no-weld construction without top or side seams, which prevents corrosion and leakage found in many other Gas Cans and Safety Cans. The non-sparking brass pour spout and flame arrestor allow for safe filling and dispensing of flammable liquids.

Eagle Gas Cans are made from 24-gauge, hot dipped galvanized steel. Meet OSHA and NFPA Code 30 requirements. All Safety Cans are lead free. Gasoline Storage Cans are FM, UL and ULC Approved. Safety cans are available in red for gasoline, blue for kerosene, and yellow for diesel. Eagle® Type I Safety Cans Product Selection are as follows:

1-gallon Eagle® Safety Gas Can
1-gallon Eagle® Safety Gas Can With Funnel – Spill Proof Gas Can
2-gallon Eagle® Safety Gas Can
2-gallon Eagle® Safety Can With Funnel – Spill Proof Gas Can
5-gallon Eagle® Safety Gas Can
5-gallon Eagle® Safety Gas Can With Funnel – Spill Proof Gas Can

Justrite® Safety Cans Offered in Type II

1-gallon Justrite® Safety Can With Hose - 5/8” OD x 9” L
2-gallon Justrite® Safety Can With Hose - 5/8” OD x 9” L
3-gallon Justrite® Safety Can With Hose – 1” OD x 9” L
3-gallon Justrite® Safety Can With Hose - 5/8” OD x 9” L
5-gallon Justrite® Safety Can With Hose – 1” OD x 9” L
5-gallon Justrite® Safety Can With Hose - 5/8” OD x 9” L

Justrite® UNO Safety Cans Also Offered in Type II

UNO Safety Cans From Justrite has a squeeze™ trigger that allows you maximum liquid flow control. Single spout for filling and pouring has flexible metal hose for accuracy and self-vents for smooth, glug-free pouring.

1-gallon Justrite® UNO Safety Can With Hose - 5/8” OD x 9” L
2-gallon Justrite® UNO Safety Can With Hose - 5/8” OD x 9” L
3-gallon Justrite® UNO Safety Can With Hose – 1” OD x 9” L
5-gallon Justrite® UNO Safety Can With Hose - 5/8” OD x 9” L
5-gallon Justrite® UNO Safety Can With Hose – 1” OD x 9” L

Eagle® Gas Cans Offered in Type II Safety Can

Eagle Type II Safety Gas Cans have the same quality features as Eagle’s Type I Safety Cans and have an additional opening. The pressure relief, spring-closing lid opening is used for filling. Eagle Type II Safety Can actuated pour valve opening with flexible metal spout is used for safely dispensing flammable liquids. In Eagle's Type II Safety Can's both openings are equipped with a non-sparking brass spout and flame arrestor designed for flash-back protection.

Eagle® Type II Safety Cans Product Selection are as follows:

2-gallon Eagle® Safety Gas Can
5-gallon Eagle® Safety Gas Can

Justrite® UNO DOT Gas Safety Cans Type II

All the great features of the easy-to-use UNO Type II Safety Gas Can with added features for D.O.T. Gas Can compliance. Single hold-down bracket makes changing from pouring to transport mode a snap with this DOT Gas Can. This DOT Gas Can also has a heavy roll bar protection mechanism.

1-gallon Justrite® UNO D.O.T Type II Gas Can With Hose - 5/8” OD x 9” L
2.5-gallon Justrite® UNO D.O.T Type II Gas Can With Hose - 5/8” OD x 9” L
2.5-gallon Justrite® UNO D.O.T Type II Gas Can With Hose – 1” OD x 9” L
5-gallon Justrite® UNO D.O.T Type II Gas Can With Hose - 5/8” OD x 9” L
5-gallon Justrite® UNO D.O.T Type II Gas Can With Hose – 1” OD x 9” L