|
Industrial Protective Clothing, Tychem SL, Provides Effective
And Economical Protection Against A Broad Range Of Chemicals. |
 |
Tychem® SL Industrial Protective Clothing is
the lightweight fabric that provides effective and economical protection
against a broad range of chemicals. Tychem® SL Industrial Protective Clothing
has a laminate of Tyvek® spun bonded olefin by DuPont and Saranex® 23-P
film from Dow Chemical. Lakeland protective clothing designs Tychem® SL
Industrial Protective Clothing with sealed seams and storm-flapped zippers.
Industrial Protective Clothing is available in white, Tychem® SL, the only
Saranex laminated material for which DuPont supplies permeation data and
technical support.
|
|

72130
|

72150
|
Tychem® SL Industrial Protective
Clothing is a laminated fabric incorporating DuPont's Tyvek® spunbonded
olefin and Dow Chemical's Saranex® 23-P film. Lakeland sealed seam
garments made with Tychem® SL provide reliable and economical Level
B protection against a spectrum of chemicals used in the agriculture
and petroleum markets. This Industrial Protective Clothing is a top
choice among workers who are mixing, loading and applying agriculture
chemicals, engaged in related cleanups, and/or in general industrial
environments.
|
|
|
Tychem® SL Permeation Data for ASTM Recommended List of Chemicals
for Evaluating Protective Clothing Materials (ASTM F1001) |
| Chemical
Name |
Physical
Phase |
Normalized
Breakthrough Time (minutes) |
Permeation
Rate (pg/cm2/min) |
| Acetone |
L |
24 |
1.6 |
| Acetonitrile |
L |
Immediate |
2.8 |
| Ammonia (anhydrous) |
G |
32 |
0.15 |
| 1,3-Butadiene |
G |
>480 |
ND |
| Carbon Disulfide |
L |
Immediate |
>50 |
| Chlorine Gas |
G |
>480 |
ND |
| Dichloromethane |
L |
Immediate |
>50 |
| Diethylamine |
L |
Immediate |
>50 |
| N,N-Dimethylformamide |
L |
109 |
0.8 |
| Ethyl Acetate |
L |
Immediate |
6.6 |
| Ethylene Oxide |
G |
Immediate |
8.4 |
| n-Hexane |
L |
146 |
0.48 |
| Hydrogen Chloride |
G |
>480 |
ND |
| Methanol |
L |
>480 |
ND |
| Methyl Chloride |
G |
>480 |
ND |
| Nitrobenzene |
L |
102 |
2.3 |
| Sodium Hydroxide, 50% |
L |
>480 |
ND |
| Sulfuric Acid (conc.) |
L |
>480 |
ND |
| Tetrachloroethylene |
L |
Immediate |
5.7 |
| Tetrahydrofuran |
L |
Immediate |
>50 |
| Toluene |
L |
Immediate |
30 |
|
|
|
|
Index
of Codes: ND = none detected, > = greater than, < = less
than,
L = Liquid, G = Gas |
| Numbers reported
are averages of samples tested by the ASTM F739 test method. Sample
results do vary and therefore averages for these results are reported |
|
Tychem® QC Industrial Protective Clothing For Protection
Against Accidental Spills, Sprays And Splashes Of Acids, Bases, And Other
Liquid Chemicals. |
 |
Rugged Splash Protection
Tychem® QC sealed seam Industrial Protective Clothing from Lakeland
Industries provides excellent splash protection against chemicals like
pesticides. They're made with rugged Tychem® by DuPont that's been "quality
coated" with 1.25 mils of polyethylene, providing a lightweight coverall
that meets Level B standards. Inorganic acids and alkalies can't get through
this Industrial Protective Clothing either. These Lakeland Protective
Chemical Suits are reliable and an economical safety measures for workers
engaged in chemical cleanups or operating in industrial labs.
Tychem QC Polycoated Industrial Protective Clothing Ideal
for Chemical Cleanups.
Lakeland's full line of "quality coated" polyethylene Tychem®
Industrial Protective Clothing is a preference in the chemical industry
for potential lightweight splash situations. Our entire collection of
sealed seam Industrial Protective Clothing - encapsulated suits, coveralls,
shirts, pants, hoods, boots, aprons and sleeves -- provide Level B protection
to your workers against accidental spills, sprays and splashes of acids,
bases, and other liquid chemicals such as pesticides. You'll recruit high-visibility
yellow Tychem® QC Industrial Protective Clothing and Garments for use
in chemical cleanups, and around industrial sites where liquid chemicals
may pose a hazardous splash threat. Tychem® QC garments are available
in grey, also.
|
|
|
Tychem® QC Permeation Data for ASTM Recommended List of Chemicals
for Evaluating Protective Clothing Materials (ASTM F1001) |
| Chemical
Name |
Physical
Phase |
Normalized
Breakthrough Time (minutes) |
Permeation
Rate (pg/cm2/min) |
| Acetone |
L |
Immediate |
10 |
| Acetonitrile |
L |
Immediate |
16 |
| Ammonia (anhydrous) |
G |
Immediate |
3.1 |
| 1,3-Butadiene |
G |
8 |
12 |
| Carbon Disulfide |
L |
Immediate |
High |
| Chlorine Gas |
G |
Immediate |
>50 |
| Dichloromethane |
L |
Immediate |
>50 |
| Diethylamine |
L |
Immediate |
64 |
| N,N-Dimethylformamide |
L |
7 |
0.72 |
| Ethyl Acetate |
L |
Immediate |
12.7 |
| Ethylene Oxide |
G |
Immediate |
168 |
| n-Hexane |
L |
Immediate |
High |
| Hydrogen Chloride |
G |
Immediate |
9.3 |
| Methanol |
L |
Immediate |
2.2 |
| Methyl Chloride |
G |
Immediate |
0.3 |
| Nitrobenzene |
L |
Immediate |
18 |
| Sodium Hydroxide, 50% |
L |
>480 |
ND |
| Sulfuric Acid
(conc.) |
L |
>480 |
ND |
| Tetrachloroethylene |
L |
Immediate |
410 |
| Tetrahydrofuran |
L |
Immediate |
183 |
| Toluene |
L |
Immediate |
High |
|
|
|
|
Index
of Codes: ND = none detected, > = greater than, < = less
than,
L = Liquid, G = Gas |
| Numbers reported
are averages of samples tested by the ASTM F739 test method. Sample
results do vary and therefore averages for these results are reported |
|
May we suggest the following items:
|