Bumper Post Sleeves Protect Steel Bollard Pipes And Vehicles, Making These Plastic Bollard Cover And Bumper Post Sleeves Essential Facility Protection Products.

1/4" Thick dome top LDPE with ultra-violet and anti-static additives for long lasting color that will not fade. Fits Pipe Diameters: 4", 6"(standard sizes). 3", 3-1/2", 5", 7",8" and 10" also available, call for details.

Durability

Bumper post sleeves are tough enough to withstand temperatures from 210°F to -40°F (99°C to -40°C). Cold storage and food processing plants like these bumper post sleeves because of it's resistance to sub zero temperatures. Bumper post sleeves are being used in various climates across North America.

Install

Easily attach bollard post sleeves to existing bollards by simply applying neoprene adhesive tape to the top and bottom edge of the post. Slowly slide the sleeve over the post twisting as you go until the sleeve fits snug around the post.

Cleaning/Maintenance

These thermoplastic polyethylene bumper post sleeves are easily cleaned with environmentally friendly industrial strength detergent and water solutions. Avoid using abrasive cleaners.

Colors

OSHA yellow, red, blue, and black are the standard bumper post sleeve colors, however we can match almost any pantone or color sample to meet your company's needs. Custom logos are also available upon request.

Measure the circumference, (distance around the post) you wish to cover.

Take that dimension and divide by PI (3.14) to receive the pipe size.

Example:
Circumference is 21.5"
Divide by 3.14 (21.5 ÷ 3.14 = 6.8)
Pipe size is 6 7/8".

The bumper post sleeve you would need is a 6.