The BullDawg™ Industrial Parts Cleaner and Washer Is A Shop’s Best Friend!

Maintenance so simple, it takes just seconds!

1 Simple filter change
A simple filter change every 4 weeks is all that is required to maintain cleaning effectiveness. Frequency of filter changes may vary depending on the usage volume.

2 Empty drain strainer and check fluid level
Clean drain strainer and remove small particle buildup from filter bag periodically. Check fluid level - occasionally a small amount of fluid may need to be added to compensate for drag-out loss. Evaporation rate of the cleaning solution is <1, so little or none is lost.

40 Gallon Rinse Tank Comes With:
300 GPH Submersible Recirculating Pump, 40” x 22” x 18” Deep Blue Tub, Fusible Linked Lid-Assist Fire Cover, Heavy Duty Formed Steel Legs, 1” N.P.T. Drain with Plug, 20” Canister Filtration Assembly, (1) 20”/5 Micron Carbon Filter, and 30 Gallons of Dawg Cleaning Solution.

All 30-& 16-Gallon Units Come With:
32” x 20” x 8” Deep Blue Tub, Plastic LocLine Flexhose, Flow-Thru Cleaning Brush, 102 VAC Electrical Controls, Fusible Linked Lid-Assist Fire Cover, Dual Drum Mounting Rings for Both 16-& 30-gallon Drums, Built-in Fluorescent Light with safety cover, 300 GPH pump with 18” pump hanger, 20” Canister Filtration Assembly, (1) 20”/5 Micron Carbon Filter, 535 Micron Stainless Steel Filter Strainer, Crumb Cup, 30 Gallon Drum, 20 Gallons of Solution (PWS300) and 10 Gallons of Solution (PWS160).